CBG9092 型号        CBG9092 品牌        CBG9092 备注       CBG9092 P2P替代

CBG9092                芯百特                   芯百特原装          TQL9092/TGA9092-SCC

DESCRIPTION

The CBG9092 is a flat-gain, high-linearity, ultra-low noise amplifier in a 2 x 2 mm surface mount package. At 2.5GHz, the

amplifier typically provides 22 dB gain, +37 dBm OIP3 and 0.5 dB Noise Figure while drawing 68 mA bias setting, from a

single 正 supply ranging from 3.3 to 5 volts. The device is housed in a green/RoHS-compliant industry-standard 2x2

mm package.

The CBG9092 integrates a shut-down biasing capability to allow for operation for TDD applications. The device is internally

matched using a high performance E-pHEMT process and only requires five external components for operation from a single

正 supply: an external RF choke and blocking/bypass capacitors and a bias resistor going to pin 1.

The CBG9092 covers the 500– 4200 MHz frequency band but can operate down to 150 MHz.

DESCRIPTION

The CBG9092 is a flat-gain, high-linearity, ultra-low noise amplifier in a 2 x 2 mm surface mount package. At 2.5GHz, the

amplifier typically provides 22 dB gain, +37 dBm OIP3 and 0.5 dB Noise Figure while drawing 68 mA bias setting, from a

single 正 supply ranging from 3.3 to 5 volts. The device is housed in a green/RoHS-compliant industry-standard 2x2

mm package.

The CBG9092 integrates a shut-down biasing capability to allow for operation for TDD applications. The device is internally

matched using a high performance E-pHEMT process and only requires five external components for operation from a single

正 supply: an external RF choke and blocking/bypass capacitors and a bias resistor going to pin 1.

The CBG9092 covers the 500– 4200 MHz frequency band but can operate down to 150 MHz.

CBG9092 型号        CBG9092 品牌        CBG9092 备注       CBG9092 P2P替代

CBG9092                芯百特                   芯百特原装          TQL9092/TGA9092-SCC

FEATURES

l 600 – 4200 MHz Operational Bandwidth

l >20 dB gain across 1.5 to 3.8 GHz

l 37 dBm OIP3 at 68mA IDD

l 0.8 dB Noise Figure @ 2.5 GHz

l Bias adjustable for linearity optimization

l Shut-down mode pin with 1.8V TTL logic

l Unconditionally stable

l Integrated shutdown control pin

l Maintains OFF state with high Pin drive

l +3.3V to +5V supply; does not require - Vgg

APPLICATIONS

l Repeaters/DAS

l Mobile Infrastructure

l 通用无线

l LTE / WCDMA / CDMA / GSM

l TDD or FDD systems

FEATURES

l 600 – 4200 MHz Operational Bandwidth

l >20 dB gain across 1.5 to 3.8 GHz

l 37 dBm OIP3 at 68mA IDD

l 0.8 dB Noise Figure @ 2.5 GHz

l Bias adjustable for linearity optimization

l Shut-down mode pin with 1.8V TTL logic

l Unconditionally stable

l Integrated shutdown control pin

l Maintains OFF state with high Pin drive

l +3.3V to +5V supply; does not require - Vgg

APPLICATIONS

l Repeaters/DAS

l Mobile Infrastructure

l 通用无线

l LTE / WCDMA / CDMA / GSM

l TDD or FDD systems

CBG9092 型号        CBG9092 品牌        CBG9092 备注       CBG9092 P2P替代

CBG9092                芯百特                   芯百特原装          TQL9092/TGA9092-SCC

CBG9092是一款平坦增益、高线性度、超低噪声放大器，采用2 x 2 mm表面贴装封装。在2.5GHz时，放大器通常提供22 dB增益，+37 dBm OIP3和0.5 dB噪声，原装CBG9092替代TQL9092推荐_质量好CBG9092替代TQL9092销售_深圳市赛矽电子有限公司，同时从3.3到5伏的单一正电源获得68 mA的偏置设置。该设备采用符合绿色/ rohs标准的2x2mm封装。

CBG9092集成了关闭偏置功能，原装CBG9092替代TQL9092推荐_芯百特原装CBG9092替代TQL9092销售_深圳市赛矽电子有限公司，允许TDD应用程序的操作。该器件内部使用高性能E-pHEMT工艺进行匹配，仅需要5个外部组件即可从单个正电源运行:外部RF扼流圈和阻塞/旁路电容器以及连接引脚1的偏置电阻。

CBG9092覆盖500 - 4200 MHz频段，但可以工作到150 MHz。

特性

* 600 - 4200 MHz操作带宽

* >20 dB增益，1.5 ~ 3.8 GHz

* 37dbm OIP3在68mA IDD

* 0.8 dB噪声图@ 2.5 GHz

*偏差可调线性优化

带有1.8V TTL逻辑的关机模式引脚

无条件稳定

集成停机控制引脚

*高引脚驱动保持OFF状态

◆+3.3V至+5V电源;不需要- Vgg

应用程序

l中继器/ DAS

*移动基础设施

*通用无线

lte / wcdma / cdma / GSM

* TDD或FDD系统

CBG9092是一款平坦增益、高线性度、超低噪声放大器，采用2 x 2 mm表面贴装封装。在2.5GHz时，原装CBG9092替代TQL9092推荐_正规CBG9092替代TQL9092_深圳市赛矽电子有限公司，放大器通常提供22 dB增益，+37 dBm OIP3和0.5 dB噪声，同时从3.3到5伏的单一正电源获得68 mA的偏置设置。该设备采用符合绿色/ rohs标准的2x2mm封装。

CBG9092集成了关闭偏置功能，允许TDD应用程序的操作。该器件内部使用高性能E-pHEMT工艺进行匹配，仅需要5个外部组件即可从单个正电源运行:外部RF扼流圈和阻塞/旁路电容器以及连接引脚1的偏置电阻。

CBG9092覆盖500 - 4200 MHz频段，但可以工作到150 MHz。