CBG9092 型号        CBG9092 品牌        CBG9092 备注       CBG9092 P2P替代

CBG9092                芯百特                   芯百特原装          TQL9092/TGA9092-SCC

DESCRIPTION

The CBG9092 is a flat-gain, high-linearity, ultra-low noise amplifier in a 2 x 2 mm surface mount package. At 2.5GHz, the

amplifier typically provides 22 dB gain, +37 dBm OIP3 and 0.5 dB Noise Figure while drawing 68 mA bias setting, from a

single 正 supply ranging from 3.3 to 5 volts. The device is housed in a green/RoHS-compliant industry-standard 2x2

mm package.

The CBG9092 integrates a shut-down biasing capability to allow for operation for TDD applications. The device is internally

matched using a high performance E-pHEMT process and only requires five external components for operation from a single

正 supply: an external RF choke and blocking/bypass capacitors and a bias resistor going to pin 1.

The CBG9092 covers the 500– 4200 MHz frequency band but can operate down to 150 MHz.

DESCRIPTION

The CBG9092 is a flat-gain, high-linearity, ultra-low noise amplifier in a 2 x 2 mm surface mount package. At 2.5GHz, the

amplifier typically provides 22 dB gain, +37 dBm OIP3 and 0.5 dB Noise Figure while drawing 68 mA bias setting, from a

single 正 supply ranging from 3.3 to 5 volts. The device is housed in a green/RoHS-compliant industry-standard 2x2

mm package.

The CBG9092 integrates a shut-down biasing capability to allow for operation for TDD applications. The device is internally

matched using a high performance E-pHEMT process and only requires five external components for operation from a single

正 supply: an external RF choke and blocking/bypass capacitors and a bias resistor going to pin 1.

The CBG9092 covers the 500– 4200 MHz frequency band but can operate down to 150 MHz.

CB5309替SKY85309频段2.4供应商_CB5309替SKY85309频段2.4_深圳市赛矽电子有限公司

CBG9092 型号        CBG9092 品牌        CBG9092 备注       CBG9092 P2P替代

CBG9092                芯百特                   芯百特原装          TQL9092/TGA9092-SCC

FEATURES

l 600 – 4200 MHz Operational Bandwidth

l >20 dB gain across 1.5 to 3.8 GHz

l 37 dBm OIP3 at 68mA IDD

l 0.8 dB Noise Figure @ 2.5 GHz

l Bias adjustable for linearity optimization

l Shut-down mode pin with 1.8V TTL logic

l Unconditionally stable

l Integrated shutdown control pin

l Maintains OFF state with high Pin drive

l +3.3V to +5V supply; does not require - Vgg

APPLICATIONS

l Repeaters/DAS

l Mobile Infrastructure

l 通用无线

l LTE / WCDMA / CDMA / GSM

l TDD or FDD systems

FEATURES

l 600 – 4200 MHz Operational Bandwidth

l >20 dB gain across 1.5 to 3.8 GHz

l 37 dBm OIP3 at 68mA IDD

l 0.8 dB Noise Figure @ 2.5 GHz

l Bias adjustable for linearity optimization

l Shut-down mode pin with 1.8V TTL logic

l Unconditionally stable

l Integrated shutdown control pin

l Maintains OFF state with high Pin drive

l +3.3V to +5V supply; does not require - Vgg

APPLICATIONS

l Repeaters/DAS

l Mobile Infrastructure

l 通用无线

l LTE / WCDMA / CDMA / GSM

l TDD or FDD systems

CBG9092 型号        CBG9092 品牌        CBG9092 备注       CBG9092 P2P替代

CBG9092                芯百特                   芯百特原装          TQL9092/TGA9092-SCC

CBG9092是一款平坦增益、高线性度、超低噪声放大器，芯百特原装CBG9092替代TQL9092商家_芯百特原装CBG9092替代TQL9092_深圳市赛矽电子有限公司，采用2 x 2 mm表面贴装封装。在2.5GHz时，放大器通常提供22 dB增益，+37 dBm OIP3和0.5 dB噪声，同时从3.3到5伏的单一正电源获得68 mA的偏置设置。该设备采用符合绿色/ rohs标准的2x2mm封装。

CBG9092集成了关闭偏置功能，允许TDD应用程序的操作。该器件内部使用高性能E-pHEMT工艺进行匹配，仅需要5个外部组件即可从单个正电源运行:外部RF扼流圈和阻塞/旁路电容器以及连接引脚1的偏置电阻。

CBG9092覆盖500 - 4200 MHz频段，但可以工作到150 MHz。

特性

* 600 - 4200 MHz操作带宽

* >20 dB增益，1.5 ~ 3.8 GHz

* 37dbm OIP3在68mA IDD

* 0.8 dB噪声图@ 2.5 GHz

*偏差可调线性优化

带有1.8V TTL逻辑的关机模式引脚

无条件稳定

集成停机控制引脚

*高引脚驱动保持OFF状态

◆+3.3V至+5V电源;不需要- Vgg

应用程序

l中继器/ DAS

*移动基础设施

*通用无线

lte / wcdma / cdma / GSM

* TDD或FDD系统

CBG9092是一款平坦增益、高线性度、超低噪声放大器，采用2 x 2 mm表面贴装封装。在2.5GHz时，放大器通常提供22 dB增益，芯百特原装CBG9092替代TQL9092商家_原装CBG9092替代TQL9092销售_深圳市赛矽电子有限公司，+37 dBm OIP3和0.5 dB噪声，芯百特原装CBG9092替代TQL9092商家_CBG9092替代TQL9092推荐_深圳市赛矽电子有限公司，同时从3.3到5伏的单一正电源获得68 mA的偏置设置。该设备采用符合绿色/ rohs标准的2x2mm封装。

CBG9092集成了关闭偏置功能，允许TDD应用程序的操作。该器件内部使用高性能E-pHEMT工艺进行匹配，仅需要5个外部组件即可从单个正电源运行:外部RF扼流圈和阻塞/旁路电容器以及连接引脚1的偏置电阻。

CBG9092覆盖500 - 4200 MHz频段，但可以工作到150 MHz。

相关资讯查看