CB2402 型号    CB2402 品牌    CB2402 备注    CB2402 P2P替代

CB2402            芯百特            芯百特原装       RFX2402E

DESCRIPTION

The CB2402 is a fully integrated, single-chip, single die RF Front-end Integrated Circuit. which incorporates all the RF

原装5G射频芯片商家_原装5G射频芯片_深圳市赛矽电子有限公司
functionality needed for today’s wireless communications.

The CB2402 architecture integrates the PA, LNA, Transmit and Receive switching circuitry, the associated matching network,

and the harmonic filter all in a CMOS single-chip device. The CB2402 is designed for use in 802.11b/g/n applications operating

at 2.4GHz. Combining superior performance, high sensitivity and efficiency, low noise, small form factor, and low cost, the

CB2402 is the ideal solution for single antenna applications, and the ideal building block for MIMO applications.

CB2402 has  low-voltage CMOS control logic, and requires minimal external components for system implementation.

The PA power detector circuit is also integrated.

CB2402 型号    CB2402 品牌    CB2402 备注    CB2402 P2P替代

CB2402            芯百特            芯百特原装       RFX2402E

FEATURES

 2.4GHz ISM, Single Chip, Single-Die RF FrontEnd IC

 Separate TX and RX Transceiver Port and Single

Antenna Port

 2.4GHz Power Amplifier with Low-Pass

Harmonic Filter

 Low Noise Amplifier

 Transmit / Receive Switch Circuitry

 High Transmit Signal Linearity Meeting

Standards for OFDM and CCK Modulation

 Integrated Power Detector for Transmit Power

Monitor and Control

 Compatible with Low Voltage (1.2V) CMOS

Control Logic or levels up to VDD

 ESD Protection Circuitry on All Ports

 DC Decoupled RF Ports

 Internal RF Decoupling on All VDD Bias Pins

 Low Noise Figure for Receive Channels

 High Power Capability for Received Signals

 Very Low DC Power Consumption

 Full On-chip Matching and Decoupling Circuitry

 Minimal External Components Required

 50-Ohm Input / Output Matching

 Market Proven CMOS Technology

 3 x 3 x 0.75mm Small Outline QFN-16 Package 

APPLICATIONS

 802.11b/g/n Embedded Applications

 802.11b/g/n NIC PC Card

 802.11b/g/n Multimedia Applications

 802.11b/g/n Mobile Platforms

 Other 2.4GHz Transceivers

 802.11b/g/n Access Point

CB2402 型号    CB2402 品牌    CB2402 备注    CB2402 P2P替代

CB2402            芯百特            芯百特原装       RFX2402E

CB2402 2.4Ghz Wi-Fi FEM QFN3x3mm

描述

CB2402是一款全集成、单芯片、单模射频前端集成电路。它包含了所有RF当今无线通信所需的功能。

CB2402架构集成了PA, LNA，发射和接收开关电路，相关匹配网络，和谐波滤波器都在一个CMOS单片机器件中。CB2402专为802.11b/g/n应用程序而设计在2.4 ghz。结合优越的性能，高灵敏度和效率，低噪音，小的外形因素，和低成本CB2402是单天线应用的理想解决方案，也是MIMO应用的理想组成部分。

CB2402具有低压CMOS控制逻辑，系统实现需要少的外部组件。同时集成了PA功率检测电路。

特性

* 2.4GHz ISM，口碑好的CB2402替RFX2402E，2.4G商家_原装CB2402替RFX2402E，2.4G推荐_深圳市赛矽电子有限公司，口碑好的CB2402替RFX2402E，2.4G商家_正宗CB2402替RFX2402E，2.4G推荐_深圳市赛矽电子有限公司，口碑好的CB2402替RFX2402E，2.4G商家_芯百特原装CB2402替RFX2402E，2.4G_深圳市赛矽电子有限公司，单片机，单模射频前端集成电路

*独立的TX和RX收发端口和单个天线端口

* 2.4GHz低通功率放大器谐波滤波器

*低噪声放大器发射/接收开关电路

*发射信号线性度高OFDM和CCK调制标准

◆发射功率集成功率检测器监控

◆兼容低电压(1.2V) CMOS控制逻辑或级别到VDD所有端口上的ESD保护电路

*直流去耦射频端口所有VDD偏置引脚的内部RF解耦

*接收通道的低噪声图

◆接收信号功率大

◆直流功耗极低完整的片上匹配和解耦电路

*所需外部组件少

◆50欧姆输入输出匹配

*经过市场验证的CMOS技术

* 3 x 3 x 0.75mm QFN-16小外型的地面垫

应用程序

802.11b/g/n嵌入式应用

◆802.11b/g/n NIC PC卡

802.11b/g/n多媒体应用

◆802.11b/g/n移动平台

●其他2.4GHz收发器

802.11b/g/n接入点

相关资讯查看